Gate Safety

 

Legislation and standards

Automated gates and traffic barriers are classified as machinery under the EU Machinery Directive. The Supply of Machinery (Safety) Regulations, which brings the European Machinery Directive (currently 2006/42/EC) into UK criminal law, are primarily concerned with ensuring new and substantially modified powered gates and barriers are safe.

The Machinery Directive requires the Responsible Person (normally the manufacturer or another ‘deemed’ to be the manufacturer for the purposes of the directive) to ensure that:

  • a conformity assessment is carried out
  • the Essential Health and Safety Requirements in Annex 1 of the directive have been met
  • a technical file is compiled
  • user instructions and maintenance instructions are provided to the operator
  • a Declaration of Conformity is issued and
  • that the gate is correctly CE marked.

Once the gate or barrier is brought into use, any failings of the gate or barrier that cause or could cause injury to an individual can be prosecuted under UK criminal law.

The major pieces of legislation of concern to manufacturers, installers and gate owners are the Supply of Machinery (Safety) Regulations 2008, Health and Safety at Work Act 1974, the Workplace (Health, Safety & Welfare) Regulations 1992, the Electricity at Work Regulations 1998 and Building Regulations (Part P England and Wales section 5.6/6 in Scotland).

Installers, business, and domestic owners are also potentially liable under UK civil law as the result of an incident with an unsafe powered gate.

The legislation and standards that need to be considered during the design, manufacture, installation, and maintenance of automated gates are:

  • the Equality Act 2010, which aims to protect disabled people and to prevent disability discrimination
  • the Disability Discrimination Act 2005 (as amended)
  • the Disability Equality Duty of which continues to apply
  • BS 7671, Requirements for Electrical Installations (also known as the “IET Wiring Regulations”)
  • Building Regulations Part P England and Wales
  • Building Standards sections 4.5 & 4.6 in Scotland

The DHF has produced a revised version of Technical Specification DHF TS 011:2018 The Code of Practice for the Design, Manufacture, Installation and Maintenance of Powered Gates and Traffic Barriers. A copy of this can be requested via email from info@accesscontrollimited.co.uk

Please click the below link to be taken to the HSE powered gates area.

 

http://www.hse.gov.uk/work-equipment-machinery/powered-gates/introduction.htm

We here at Access Control Limited take safety seriously.

 

If we take on the work at  a customer site we take on part of the legal responsability with regards to your system being in a safe usable condition.

 

 

If we find a clients system unsafe we will advise you of the issue/s in writing. We will advice a course of action to return the gates into a safe usable condition.

 

 

DHF / Gate Safe

Further safety information can be obtained by searching online "Gate safe" and DHF

 

Print Print | Sitemap
© Copyright Access Control Ltd 2020. All Rights Reserved. T: 03335776227